Find an experienced builder in Gold Coast

We need our business premises driveway water blasted . It is approximately 30metres long x 5 metres wide.

Looking for somene to demolish concrete pool and concrete fence and take away everything. Size of the pool: 11x4m, 1.7m deep. Concrete fence size: 6x2

I would like a quote for a hardwood pergola 4.20x4.20m. Clear roof The ground is pavers.

Remove old tiles sink from 3rd floor apartment with no lift . You would need a trailer and somewhere to dispose of the rubbish . The rubbish is already in buckets which would need to be returned.

Hi, this is mainly for a design look but will be used a deck. Looking for a 3x4 low deck 100mm off the ground deck. It will be under a pergola and will have day beds on top. Looking for a dark timber colour. It is going on top of a tiled area outdoors and will have a pergola covering it. Ground is ready to go.

I would like someone to come out and give us a quote to do a large 6.5x14m slab for a shed (100mm thick) and do to am adjoining driveway. The ground will be prepped and level for the laying

I need an experienced builder/ carpenter/handy man for the following jobs to be completed within a 4 to 5 days. 1- build 3.5 internal walls with 2 doors openings in 2 of the walls. 2- install 2 standard door frames, doors and handles Wall sizes ( approximately): First wall 4*2.4 m Second wall 3*2.4 m Third wall 3* 2.4 m Half wall 3*0.5 m Walls will be built with villaboard water resistant lining as all walls are for wet areas and must be fitted to existing ceiling. Water proofing will be done by tiler. There is no electric work involved. All building materials will be provided, you may bring your own tools if you prefer, but basic tools will be provided including , screws, , circular saw, sawhorses,nail gun, villaboard knife, square and spirit level. Rates for the job are as follows : Wall installation $600 per wall $400 for the half wall Doors and frame installation $300 per door. Total price on offer :$2800 for labour cost only. Builder Must have own ABN and insurance. If Any Additional work is required it will be priced separately between myself and the builder. Project timeline : 10 June to 15 June 2024

I need someone handy to remove a paint from a driveway. Water pressure and paint removal may be required

I need a non structural wall installed in a room, the wall will go on a tiled floor. Wall size is standard height 2.4 m and is 2 meters wide. Please put your offers below. Offer may include Labor cost only or with supplying of materials. No paint required as the wall will be tiled all the way up to ceiling.

Quotes to Build Brick Fire Wall - 90/90/90 rated at end of balcony. Dimensions 3000mm wide X 6500mm high. Build on existing concrete strip footing

52sqm 100mm concrete slab include ground work,boxing etc

Sealing my brand-new driveway, It would be best to have about 2L of Sealer to seal the surface and do the touch-ups of the corners and edges. Please note you need to have a paintbrush, paint roller and a paint tray.

Looking to install a new automatic sliding gate and I need to lay a concrete slab for the gate footing to roll to as well as a small slab where to motor will sit. Would be good if this included digging the trench or I can do that myself before hand. Size: 4,400mm long x 200mm wide and 100-150mm deep Motor pad: 250mm x 450mm x 100-150mm Ground is flat on this area but need to ensure its all level with driveway

QBCC Licensed Builder required to quote on garage conversion, no plumbing or electrical work required. Work required: establish internal framing,create new entry point, install of windows & attach exterior cladding to existing house brick. Plans available. Respectfully, Please only respond if you are able to turn up when you say you will and have availability to commence work within the next 2-3wks.

Steel patio materials need lifting and transporting from Yatala to Wongawallen. Approx 2.5 ton and 6 m long.

I need a pergola to be built off the side of my house. I have sourced the 200x200 hardwood timbers It will not have a roof - just timber beams. The below images are the inspiration pictures. The approx size is 6mx 3.5m I had a builder lined up but he is pushing the date out and we need it built before 6 May

We are looking for tilers to renovate the entrance of our building. We will supply the tiles. Should an on-site evaluation be necessary to prepare your quote, please feel free to visit us at any time during standard business hours. Our address is Olympus Apartments, 60 The Esplanade, Surfers Paradise.

The car port is approximately 8x8 meters. It should be built in the same way as on pictures. I need a quote for materials and labour.

Build 3.8 meters of timber retaining wall and connect with the existing retaining wall. Pictures of the work site are attached. The tasker will need to quote for labour. I will pay for timber and consumables.

Build a timber frame & install plaster Velux skylight shaft to/from bathroom (Supply materials as required, rame up shaft, sheet and set, sand and paint shaft). Hi there, I’m looking for a skilled / registered tradesperson to build a timber frame and plaster skylight light shaft in my bathroom. Project Details: • Construct a light shaft connected to an existing skylight. • Use quality timber for framing and finish with plaster. What I Need in Your Quote: • Total cost (materials and labor). • Timeframe for completion. • Your experience with similar projects. - Due date: Flexible